Low-carbon general purpose steel wire, heat-treated

Low-carbon general purpose steel wire, heat-treated

For the manufacture of nails, bindings, fences, wicker nets.

0,5 — 13,00 mm

St1, St2, St3 of all degrees of deoxidization are according to DSTU 2770-94;

1006, 1008, 1010, 1011, 1012, 1013, 1015, 1016, 1017, 1018, 1020 are according to SOU MPP 77.140-236;

С4D, С7D, С9D, С10D, С12D, С15D, С18D, C20D  are according to DSTU EN 10016

precision class I, Т1, Т2, Т3

ТU U 27.3-05393145-001-2004

DSTU EN 10218-2-2001

By the additional agreement with the Supplier the production of the wire with intermediate diameters is possible.

At the customer’s request it is possible to produce the wire with more strict requirements regarding the geometry and tensile strength, without oxide scale in the «light annealing» mode.

The production of oiled wire is possible.

By the additional agreement with the Supplier the production of the wire with intermediate diameters is possible.

At the customer’s request it is possible to produce the wire with more strict requirements regarding the geometry and tensile strength, without oxide scale in the «light annealing» mode.

The production of oiled wire is possible.

Nominal diameter, mmWire diameter tolerance, mm

Tensile strength,

N/mm2(kg/mm2)

Relative elongation, %, not lessType of shipment – coils weight, kg
0,5 – 0,75-0,04

290-490

(30-50)

15small coils of free winding of 20-40
0,8 – 1,0-0,0515

small coils of free winding of 25-80;

heavy-weight coils of 550±50;

heavy-weight  coils of 950±50 of conic winding;

coils of «Rosette» type up to 300

1,1 – 1,2-0,0615
1,3 – 1,5-0,1015
1,6 – 2,0-0,1015

small coils of free winding of 30-80; 100 ±10;

heavy-weight coils of 950±50; 1950±100

coils of «Rosette» type up to 800;

coils of «Brehmen rings» type of 20-40

2,2 – 2,5-0,1215
2,8 – 3,2-0,1215
3,5 – 4,5-0,1615
5,0 – 6,0-0,1620
7,0 – 10,0-0,2020heavy-weight coils of 300-400; 950±50; 1950±100
11,0 – 13,0-0,2020coils of free winding of 300-500

The production of the wire with two-sided ultimate deviation is possible. The diameter tolerance should correspond to the values, stated in the table.

Admissible tolerances on diameter of wire,  mmThe range of diameters precision class,  mm
Т1Т2Т3
±0,0120,25≤ d <0,33
±0,0150,25≤ d <0,310,33≤ d <0,52
±0,0200,31≤ d <0,550,52≤ d <0,91
±0,0250,30≤ d <0,520,55≤ d <0,860,91≤ d <1,42
±0,0300,52≤ d <0,740,86≤ d <1,241,42≤ d <2,05
±0,0350,74≤ d <1,011,24≤ d <1,692,05≤ d <2,78
±0,0401,01≤ d <1,311,69≤ d <2,202,78≤ d <3,63
±0,0451,31≤ d <1,662,20≤ d <2,783,63≤ d <,4,60
±0,0501,66≤ d <2,052,78≤ d <3,434,60≤ d <5,67
±0,0602,05≤ d <2,943,43≤ d <4,945,67≤ d <8,17
±0,0702,94≤ d <4,014,94≤ d <6,738,17≤ d ≤11,12
±0,0804,01≤ d <5,236,73≤ d <8,7811,12≤ d ≤13,00
±0,0905,23≤ d <6,628,78≤ d ≤11,12
±0,1006,62≤ d <8,1711,12≤ d ≤13,00
±0,1208,17≤ d ≤11,76
±0,14011,76≤ d ≤13,00
The range of diameters precision class I,  mmAdmissible tolerances on diameter of wire,  mm
0,25≤ d <0,28±0,010
0,28≤ d <0,37±0,015
0,37≤ d <0,63±0,020
0,63≤ d <1,10±0,025
1,10≤ d <1,30±0,03
1,30≤ d <2,20±0,05
2,20≤ d <3,50±0,06
3,50≤ d <6,30±0,08
6,30≤ d ≤10,00±0,10

Wire diameter, mm

Coil weight, kg

Outer diameter of coil, mm

Inner diameter of coil, mm

Height, mm

Quantity of coils in package, pcs.

Outer diameter of package, mm

Inner diameter of package, mm

Height of package, mm

0,5 – 1,5

25

440 ±10

250 ±10

100 ±10

8

460 ±10

220 ±10

520 ±20

440 ±10*

240 ±10*

700 ±30*

50

450 ±10

230 ±10

140 ±10

6

470 ±20

200 ±20

430 ±30

450 ±10*

230 ±10*

610 ±20*

80

460 ±20

220 ±20

200 ±20

5

470 ±20

200 ±20

480 ±30

450 ±10*

230 ±10*

780 ±40*

1,0 – 1,5

550 ± 50

710 ±10

450

420 ±10

 

 

 

 

0,6 – 1,5

950±50

are of conic winding

top 700 ±10

355

580

 

 

 

 

base 745 ±10

1,6 – 2,8

50

620 ±20

470 ±20

80 ±20

8

640 ±20

440 ±20

480 ±60

630 ±20*

410 ±20*

850 ±30*

80

650 ±20

460 ±20

130±20

5

700 ±20

410 ±20

460 ±60

660 ±20*

420 ±20*

700 ±60*

100 ± 10

660 ± 20

460 ±20

150 ±20

5

700 ±20

410 ±20

460 ±60

660 ±20*

420 ±20*

700 ±60*

3,0 – 6,0

50

620 ±20

470 ±20

90 ±20

8

640 ±20

440 ±20

510 ±60

630 ±20*

410 ±20*

870 ±30*

80

650 ±20

460 ±20

140 ±20

5

700 ±20

410 ±20

510 ±60

660 ±20*

420 ±20*

720 ±60*

100 ± 10

660 ±20

460 ±20

160 ±20

5

700 ±20

410 ±20

510 ±60

660 ±20*

420 ±20*

720 ±60*

1,6 – 6,0

950 ± 100

830 ± 20

450 ± 10

440 ± 20

    

2,4 – 10,0

1950±100

960±20

500±10

650±20

    

2950±100

1050±20

620±10

840±20

    

5,5 – 8,0

80-300

750

500

80-300

    

5,5 – 10,0

80-300

850

600

80-300

    

6,0 – 13,0

500

1100±100

520 ±20

400

    

Parameter

Rosette Size

Wire diameter, mm

0,8 – 1,5

1,6 – 4,0

Weight, kg

150±10

500±10

1000±10

Outer Diameter, mm

450 ±10

810 ±10

810 ±20

Inner diameter, mm

225 ±20

370 ±10

370 ±10

Height, mm

480 ±20

430 ±20

900 ±20

Wire diameter, mm

Coil weight, kg

Outer diameter of coil, mm

Inner diameter of coil, mm

Height, mm

Inner diameter of spool, mm

0,25-0,55

до 20

250

160

200

36

Production of heat-treated wire is possible in coils of rectangular section – “Brehmen rings”

 with the following technical requirements:

— diameters from 2,00 up to 5,00 mm; wire oiled/not oiled;

— tensile strength 300-400 N/mm2;

— The production of oiled wire is possible.

Overall dimensions of coils  “Brehmen rings”:

Coil weight, kg

Inner diameter, mm

Outer diameter, mm

Height, mm

20

100

250

100

30

210

310

150+2

40

210

330+5

150+2

Delivery:  coils weight – “Brehmen rings” — on pallet 960 kg, 1080 kg.

Production of heat-treated wire is possible in coils with a special form winding of weight 200 grams

with the following technical requirements:

— diameters from 1,2 mm; 1,4 mm; 1,6 mm; wire not oiled;

— tensile strength 300-490 N/mm2;

Sizes acc. to drawing in mm:

a

b

c

d

e

44-52

17-20

39-43

23-26

65-70

Type of packaging: plastic buckets of 20 kg (100 coils)
Type of shipment: on pallet, net weight 720 kg (36 buckets)

Type of shipment

Weight, kg

Material or combination of materials for packing

Plastic spools  К-250А

up to 20

Without additional packing

Stretch

Coil

20-100

Without additional packing

Stretch (for wire diam (0,5-0,8) mm

polyethylene film

inhibited film

 Package coils


Heavy-weight coil


Heavy-weight coil

(conical winding)


Heavy-weight coil

 

 

 

“Rosette”

180-500


550±50


950±50

 


950±50

 

1950±100


up to 1000

Without additional packing

Stretch  (for heavy-weight coils of conical winding

polyethylene film

inhibited film

polypropylene sleeve

inhibited film  + polypropylene sleeve

polyethylene film + polypropylene sleeve

two-layer sleeve (polypropylene with inhibited paper)

Nominal diameter, mmWire diameter tolerance, mm

Tensile strength,

N/mm2(kg/mm2)

Relative elongation, %, not lessType of shipment – coils weight, kg
0,5 – 0,75-0,04

290-490

(30-50)

15small coils of free winding of 20-40
0,8 – 1,0-0,0515

small coils of free winding of 25-80;

heavy-weight coils of 550±50;

heavy-weight  coils of 950±50 of conic winding;

coils of «Rosette» type up to 300

1,1 – 1,2-0,0615
1,3 – 1,5-0,1015
1,6 – 2,0-0,1015

small coils of free winding of 30-80; 100 ±10;

heavy-weight coils of 950±50; 1950±100

coils of «Rosette» type up to 800;

coils of «Brehmen rings» type of 20-40

2,2 – 2,5-0,1215
2,8 – 3,2-0,1215
3,5 – 4,5-0,1615
5,0 – 6,0-0,1620
7,0 – 10,0-0,2020heavy-weight coils of 300-400; 950±50; 1950±100
11,0 – 13,0-0,2020coils of free winding of 300-500

The production of the wire with two-sided ultimate deviation is possible. The diameter tolerance should correspond to the values, stated in the table.

Admissible tolerances on diameter of wire,  mmThe range of diameters precision class,  mm
Т1Т2Т3
±0,0120,25≤ d <0,33
±0,0150,25≤ d <0,310,33≤ d <0,52
±0,0200,31≤ d <0,550,52≤ d <0,91
±0,0250,30≤ d <0,520,55≤ d <0,860,91≤ d <1,42
±0,0300,52≤ d <0,740,86≤ d <1,241,42≤ d <2,05
±0,0350,74≤ d <1,011,24≤ d <1,692,05≤ d <2,78
±0,0401,01≤ d <1,311,69≤ d <2,202,78≤ d <3,63
±0,0451,31≤ d <1,662,20≤ d <2,783,63≤ d <,4,60
±0,0501,66≤ d <2,052,78≤ d <3,434,60≤ d <5,67
±0,0602,05≤ d <2,943,43≤ d <4,945,67≤ d <8,17
±0,0702,94≤ d <4,014,94≤ d <6,738,17≤ d ≤11,12
±0,0804,01≤ d <5,236,73≤ d <8,7811,12≤ d ≤13,00
±0,0905,23≤ d <6,628,78≤ d ≤11,12
±0,1006,62≤ d <8,1711,12≤ d ≤13,00
±0,1208,17≤ d ≤11,76
±0,14011,76≤ d ≤13,00
The range of diameters precision class I,  mmAdmissible tolerances on diameter of wire,  mm
0,25≤ d <0,28±0,010
0,28≤ d <0,37±0,015
0,37≤ d <0,63±0,020
0,63≤ d <1,10±0,025
1,10≤ d <1,30±0,03
1,30≤ d <2,20±0,05
2,20≤ d <3,50±0,06
3,50≤ d <6,30±0,08
6,30≤ d ≤10,00±0,10

Wire diameter, mm

Coil weight, kg

Outer diameter of coil, mm

Inner diameter of coil, mm

Height, mm

Quantity of coils in package, pcs.

Outer diameter of package, mm

Inner diameter of package, mm

Height of package, mm

0,5 – 1,5

25

440 ±10

250 ±10

100 ±10

8

460 ±10

220 ±10

520 ±20

440 ±10*

240 ±10*

700 ±30*

50

450 ±10

230 ±10

140 ±10

6

470 ±20

200 ±20

430 ±30

450 ±10*

230 ±10*

610 ±20*

80

460 ±20

220 ±20

200 ±20

5

470 ±20

200 ±20

480 ±30

450 ±10*

230 ±10*

780 ±40*

1,0 – 1,5

550 ± 50

710 ±10

450

420 ±10

 

 

 

 

0,6 – 1,5

950±50

are of conic winding

top 700 ±10

355

580

 

 

 

 

base 745 ±10

1,6 – 2,8

50

620 ±20

470 ±20

80 ±20

8

640 ±20

440 ±20

480 ±60

630 ±20*

410 ±20*

850 ±30*

80

650 ±20

460 ±20

130±20

5

700 ±20

410 ±20

460 ±60

660 ±20*

420 ±20*

700 ±60*

100 ± 10

660 ± 20

460 ±20

150 ±20

5

700 ±20

410 ±20

460 ±60

660 ±20*

420 ±20*

700 ±60*

3,0 – 6,0

50

620 ±20

470 ±20

90 ±20

8

640 ±20

440 ±20

510 ±60

630 ±20*

410 ±20*

870 ±30*

80

650 ±20

460 ±20

140 ±20

5

700 ±20

410 ±20

510 ±60

660 ±20*

420 ±20*

720 ±60*

100 ± 10

660 ±20

460 ±20

160 ±20

5

700 ±20

410 ±20

510 ±60

660 ±20*

420 ±20*

720 ±60*

1,6 – 6,0

950 ± 100

830 ± 20

450 ± 10

440 ± 20

    

2,4 – 10,0

1950±100

960±20

500±10

650±20

    

2950±100

1050±20

620±10

840±20

    

5,5 – 8,0

80-300

750

500

80-300

    

5,5 – 10,0

80-300

850

600

80-300

    

6,0 – 13,0

500

1100±100

520 ±20

400

    

Parameter

Rosette Size

Wire diameter, mm

0,8 – 1,5

1,6 – 4,0

Weight, kg

150±10

500±10

1000±10

Outer Diameter, mm

450 ±10

810 ±10

810 ±20

Inner diameter, mm

225 ±20

370 ±10

370 ±10

Height, mm

480 ±20

430 ±20

900 ±20

Wire diameter, mm

Coil weight, kg

Outer diameter of coil, mm

Inner diameter of coil, mm

Height, mm

Inner diameter of spool, mm

0,25-0,55

до 20

250

160

200

36

Production of heat-treated wire is possible in coils of rectangular section – “Brehmen rings”

 with the following technical requirements:

— diameters from 2,00 up to 5,00 mm; wire oiled/not oiled;

— tensile strength 300-400 N/mm2;

— The production of oiled wire is possible.

Overall dimensions of coils  “Brehmen rings”:

Coil weight, kg

Inner diameter, mm

Outer diameter, mm

Height, mm

20

100

250

100

30

210

310

150+2

40

210

330+5

150+2

Delivery:  coils weight – “Brehmen rings” — on pallet 960 kg, 1080 kg.

Production of heat-treated wire is possible in coils with a special form winding of weight 200 grams

with the following technical requirements:

— diameters from 1,2 mm; 1,4 mm; 1,6 mm; wire not oiled;

— tensile strength 300-490 N/mm2;

Sizes acc. to drawing in mm:

a

b

c

d

e

44-52

17-20

39-43

23-26

65-70

Type of packaging: plastic buckets of 20 kg (100 coils)
Type of shipment: on pallet, net weight 720 kg (36 buckets)

Type of shipment

Weight, kg

Material or combination of materials for packing

Plastic spools  К-250А

up to 20

Without additional packing

Stretch

Coil

20-100

Without additional packing

Stretch (for wire diam (0,5-0,8) mm

polyethylene film

inhibited film

 Package coils


Heavy-weight coil


Heavy-weight coil

(conical winding)


Heavy-weight coil

 

 

 

“Rosette”

180-500


550±50


950±50

 


950±50

 

1950±100


up to 1000

Without additional packing

Stretch  (for heavy-weight coils of conical winding

polyethylene film

inhibited film

polypropylene sleeve

inhibited film  + polypropylene sleeve

polyethylene film + polypropylene sleeve

two-layer sleeve (polypropylene with inhibited paper)