Low-carbon general purpose steel wire, non heat-treated
Low-carbon general purpose steel wire, non heat-treated
For the manufacture of nails, bindings, fences, wicker nets.
0,25 — 13,00 mm
St1, St2, St3 of all degrees of deoxidization are according to DSTU 2770-94;
1006, 1008, 1010, 1011, 1012, 1013, 1015, 1016, 1017, 1018, 1020 are according to SOU MPP 77.140-236;
С4D, С7D, С9D, С10D, С12D, С15D, С18D, C20D are according to DSTU EN 10016
precision class I, Т1, Т2, Т3
ТU U 27.3-05393145-001-2004
DSTU EN 10218-2-2001
At the customer’s request it is possible to produce wire with more strict requirements regarding the geometry and tensile strength.
The production of the wire with two-sided ultimate deviation is possible.
The Wire of diameters from 2,0 up to 6,0 mm can be supplied in cut and length from 0,2 up to 6,0 meter.
The Wire to be tied in bundles of various weights those to form into a transport package up to 1000 kg.
For the manufacture of nails, bindings, fences, wicker nets.
0,25 — 13,00 mm
St1, St2, St3 of all degrees of deoxidization are according to DSTU 2770-94;
1006, 1008, 1010, 1011, 1012, 1013, 1015, 1016, 1017, 1018, 1020 are according to SOU MPP 77.140-236;
С4D, С7D, С9D, С10D, С12D, С15D, С18D, C20D are according to DSTU EN 10016
precision class I, Т1, Т2, Т3
ТU U 27.3-05393145-001-2004
DSTU EN 10218-2-2001
At the customer’s request it is possible to produce wire with more strict requirements regarding the geometry and tensile strength.
The production of the wire with two-sided ultimate deviation is possible.
The Wire of diameters from 2,0 up to 6,0 mm can be supplied in cut and length from 0,2 up to 6,0 meter.
The Wire to be tied in bundles of various weights those to form into a transport package up to 1000 kg.
Nominal diameter, mm | Wire diameter tolerance, mm (normal precision) | Tensile strength, N/mm2 (kg/mm2) | Type of shipment – coils weight, kg |
0,25 – 0,55 | -0,02 | 690-1370 (70-140) | Plastic spools К-250А net weight up to 20 |
0,56 – 0,65 | -0,04 | 690-1270 (70-130) | small coils of free winding of 20-40; heavy coils 550±50; 950±50 of conic winding |
0,6 – 0,75 | -0,02 | 690-1270 (70-130) | |
0,8 – 1,0 | -0,05 | 690-1270 (70-130) | small coils of free winding of 25-80; heavy-weight coils of 550±50; 950±100; heavy-weight coils of 950±50 of conic winding; coils of «Rosette» type 150±10; up to 300 |
1,1 – 1,2 | -0,06 | 590-1270 (60-130) | |
1,3 – 1,5 | -0,10 | 590-1180 (60-120) | |
1,6 – 2,0 | -0,10 | 590-1180 (60-120) | small coils of free winding of 30-80; 100 ±10; heavy-weight coils of 950±50; coils of «Rosette» type up to 800 |
2,2 – 2,5 | -0,12 | 590-1180 (60-120) | |
2,8 – 3,2 | -0,12 | 540-1080 (55-110) | |
3,5 – 4,5 | -0,16 | 440-930 (45-95) | small coils of free winding of 50-80; 100 ±10; heavy-weight coils of 950±50; 1950±100 coils of «Rosette» type up to 800 |
5,0 – 6,0 | -0,16 | 390-830 (40-85) | |
5,5 – 10,0 | -0,16 | 390-600 (40-61) | heavy-weight coils of 300-500; 950±50; 1950±100, 2950±100 |
6,1 – 10,0 | -0,20 | 390-700 (40-71) | |
10,0 – 13,0 | -0,20 | 390-700 (40-71) | coils of free winding of 300-500 |
By the additional agreement with the Supplier the production of the wire with intermediate diameters is possible.
Admissible tolerances on diameter of wire, mm | The range of diameters precision class, mm | ||
Т1 | Т2 | Т3 | |
±0,012 | – | – | 0,25≤ d <0,33 |
±0,015 | – | 0,25≤ d <0,31 | 0,33≤ d <0,52 |
±0,020 | – | 0,31≤ d <0,55 | 0,52≤ d <0,91 |
±0,025 | 0,30≤ d <0,52 | 0,55≤ d <0,86 | 0,91≤ d <1,42 |
±0,030 | 0,52≤ d <0,74 | 0,86≤ d <1,24 | 1,42≤ d <2,05 |
±0,035 | 0,74≤ d <1,01 | 1,24≤ d <1,69 | 2,05≤ d <2,78 |
±0,040 | 1,01≤ d <1,31 | 1,69≤ d <2,20 | 2,78≤ d <3,63 |
±0,045 | 1,31≤ d <1,66 | 2,20≤ d <2,78 | 3,63≤ d <,4,60 |
±0,050 | 1,66≤ d <2,05 | 2,78≤ d <3,43 | 4,60≤ d <5,67 |
±0,060 | 2,05≤ d <2,94 | 3,43≤ d <4,94 | 5,67≤ d <8,17 |
±0,070 | 2,94≤ d <4,01 | 4,94≤ d <6,73 | 8,17≤ d ≤11,12 |
±0,080 | 4,01≤ d <5,23 | 6,73≤ d <8,78 | 11,12≤ d ≤13,00 |
±0,090 | 5,23≤ d <6,62 | 8,78≤ d ≤11,12 | – |
±0,100 | 6,62≤ d <8,17 | 11,12≤ d ≤13,00 | – |
±0,120 | 8,17≤ d ≤11,76 | – | – |
±0,140 | 11,76≤ d ≤13,00 | – | – |
The range of diameters precision class I, mm | Admissible tolerances on diameter of wire, mm |
0,25≤ d <0,28 | ±0,010 |
0,28≤ d <0,37 | ±0,015 |
0,37≤ d <0,63 | ±0,020 |
0,63≤ d <1,10 | ±0,025 |
1,10≤ d <1,30 | ±0,03 |
1,30≤ d <2,20 | ±0,05 |
2,20≤ d <3,50 | ±0,06 |
3,50≤ d <6,30 | ±0,08 |
6,30≤ d ≤10,00 | ±0,10 |
Wire diameter, mm | Coil weight, kg | Outer diameter of coil, mm | Inner diameter of coil, mm | Height, mm | Quantity of coils in package, pcs. | Outer diameter of package, mm | Inner diameter of package, mm | Height of package, mm |
0,5 – 1,5 | 25 | 440 ±10 | 250 ±10 | 100 ±10 | 8 | 460 ±10 | 220 ±10 | 520 ±20 |
440 ±10* | 240 ±10* | 700 ±30* | ||||||
50 | 450 ±10 | 230 ±10 | 140 ±10 | 6 | 470 ±20 | 200 ±20 | 430 ±30 | |
450 ±10* | 230 ±10* | 610 ±20* | ||||||
80 | 460 ±20 | 220 ±20 | 200 ±20 | 5 | 470 ±20 | 200 ±20 | 480 ±30 | |
450 ±10* | 230 ±10* | 780 ±40* | ||||||
1,0 – 1,5 | 550 ± 50 | 710 ±10 | 450 | 420 ±10 |
|
|
| |
0,6 – 1,5 | 950±50 are of conic winding | top 700 ±10 | 355 | 580 |
|
|
| |
base 745 ±10 | ||||||||
1,6 – 2,8 | 50 | 620 ±20 | 470 ±20 | 80 ±20 | 8 | 640 ±20 | 440 ±20 | 480 ±60 |
630 ±20* | 410 ±20* | 850 ±30* | ||||||
80 | 650 ±20 | 460 ±20 | 130±20 | 5 | 700 ±20 | 410 ±20 | 460 ±60 | |
660 ±20* | 420 ±20* | 700 ±60* | ||||||
100 ± 10 | 660 ± 20 | 460 ±20 | 150 ±20 | 5 | 700 ±20 | 410 ±20 | 460 ±60 | |
660 ±20* | 420 ±20* | 700 ±60* | ||||||
3,0 – 6,0 | 50 | 620 ±20 | 470 ±20 | 90 ±20 | 8 | 640 ±20 | 440 ±20 | 510 ±60 |
630 ±20* | 410 ±20* | 870 ±30* | ||||||
80 | 650 ±20 | 460 ±20 | 140 ±20 | 5 | 700 ±20 | 410 ±20 | 510 ±60 | |
660 ±20* | 420 ±20* | 720 ±60* | ||||||
100 ± 10 | 660 ±20 | 460 ±20 | 160 ±20 | 5 | 700 ±20 | 410 ±20 | 510 ±60 | |
660 ±20* | 420 ±20* | 720 ±60* | ||||||
1,6 – 6,0 | 950 ± 100 | 830 ± 20 | 450 ± 10 | 440 ± 20 | ||||
2,4 – 10,0 | 1950±100 | 960±20 | 500±10 | 650±20 | ||||
2950±100 | 1050±20 | 620±10 | 840±20 | |||||
5,5 – 8,0 | 80-300 | 750 | 500 | 80-300 | ||||
5,5 – 10,0 | 80-300 | 850 | 600 | 80-300 | ||||
6,0 – 13,0 | 500 | 1100±100 | 520 ±20 | 400 |
Parameter | Rosette Size | ||
Wire diameter, mm | 0,8 – 1,5 | 1,6 – 4,0 | |
Weight, kg | 150±10 | 500±10 | 1000±10 |
Outer Diameter, mm | 450 ±10 | 810 ±10 | 810 ±20 |
Inner diameter, mm | 225 ±20 | 370 ±10 | 370 ±10 |
Height, mm | 480 ±20 | 430 ±20 | 900 ±20 |
Wire diameter, mm | Coil weight, kg | Outer diameter of coil, mm | Inner diameter of coil, mm | Height, mm | Inner diameter of spool, mm |
0,25-0,55 | до 20 | 250 | 160 | 200 | 36 |
Production of heat-treated wire is possible in coils of rectangular section – “Brehmen rings”
with the following technical requirements:
— diameters from 2,00 up to 5,00 mm; wire oiled/not oiled;
— tensile strength 300-400 N/mm2;
— The production of oiled wire is possible.
Overall dimensions of coils “Brehmen rings”:
Coil weight, kg | Inner diameter, mm | Outer diameter, mm | Height, mm |
20 | 100 | 250 | 100 |
30 | 210 | 310 | 150+2 |
40 | 210 | 330+5 | 150+2 |
Delivery: coils weight – “Brehmen rings” — on pallet 960 kg, 1080 kg.
Production of heat-treated wire is possible in coils with a special form winding of weight 200 grams
with the following technical requirements:
— diameters from 1,2 mm; 1,4 mm; 1,6 mm; wire not oiled;
— tensile strength 300-490 N/mm2;
Sizes acc. to drawing in mm:
a | b | c | d | e |
44-52 | 17-20 | 39-43 | 23-26 | 65-70 |
Type of packaging: plastic buckets of 20 kg (100 coils)
Type of shipment: on pallet, net weight 720 kg (36 buckets)
Type of shipment | Weight, kg | Material or combination of materials for packing |
Plastic spools К-250А | up to 20 | Without additional packing |
Stretch | ||
Coil | 20-100 | Without additional packing |
Stretch (for wire diam (0,5-0,8) mm | ||
polyethylene film | ||
inhibited film | ||
Package coils
(conical winding)
“Rosette” | 180-500
1950±100
| Without additional packing |
Stretch (for heavy-weight coils of conical winding | ||
polyethylene film | ||
inhibited film | ||
polypropylene sleeve | ||
inhibited film + polypropylene sleeve | ||
polyethylene film + polypropylene sleeve | ||
two-layer sleeve (polypropylene with inhibited paper) |
Nominal diameter, mm | Theoretical weight of 1 meter of steel wire, g/m | Theoretical length of 1 MT of steel wire (km/MT) | Nominal diameter, mm | Theoretical weight of 1 meter of steel wire, g/m | Theoretical length of 1 MT of steel wire (km/MT) |
0,50 | 1,5 | 666,66 | 4,0 | 98,6 | 10,142 |
0,60 | 2,2 | 450,772 | 4,1 | 103,6 | 9,654 |
0,70 | 3,0 | 331,180 | 4,2 | 108,8 | 9,199 |
0,80 | 3,9 | 253,559 | 4,3 | 113,99 | 8,777 |
0,90 | 4,99 | 200,343 | 4,4 | 119,4 | 8,382 |
1,0 | 6,2 | 162,278 | 4,5 | 124,8 | 8,014 |
1,05 | 6,8 | 147,191 | 4,6 | 130,0 | 7,692 |
1,10 | 7,5 | 134,114 | 4,7 | 136,0 | 7,353 |
1,15 | 8,2 | 122,706 | 4,8 | 142,0 | 7,043 |
1,20 | 8,9 | 112,693 | 4,9 | 148,0 | 6,756 |
1,25 | 9,6 | 103,858 | 5,0 | 154,1 | 6,491 |
1,30 | 10,4 | 96,022 | 5,1 | 160,0 | 6,250 |
1,35 | 11,2 | 89,041 | 5,2 | 167,0 | 5,988 |
1,40 | 12,1 | 82,795 | 5,3 | 173,0 | 5.780 |
1,45 | 12,9 | 77,183 | 5,4 | 180,0 | 5.555 |
1,50 | 13,9 | 72,123 | 5,5 | 185,5 | 5,365 |
1,55 | 14,8 | 67,545 | 5,6 | 193,3 | 5,175 |
1,60 | 15,8 | 63,391 | 5,7 | 200,0 | 5.000 |
1,65 | 16,8 | 59,605 | 5,8 | 207,0 | 4.831 |
1,70 | 17,8 | 56,151 | 5,9 | 215,0 | 4.651 |
1,75 | 18,9 | 52,989 | 6,0 | 221,9 | 4,508 |
1,80 | 19,9 | 50,085 | 6,1 | 299,0 | 3.344 |
1,85 | 21,1 | 47,414 | 6,2 | 237,0 | 4.219 |
1,90 | 22,3 | 44,953 | 6,3 | 245,0 | 4.081 |
1,95 | 23,4 | 42,676 | 6,4 | 253,0 | 3.953 |
2,0 | 24,7 | 40,570 | 6,5 | 260,5 | 3,841 |
2,10 | 27,2 | 36,798 | 6,6 | 269,0 | 3,717 |
2,20 | 29,8 | 33,528 | 6,7 | 277,0 | 3,610 |
2,30 | 32,6 | 30,677 | 6,8 | 285,0 | 3,509 |
2,40 | 35,5 | 28,173 | 6,9 | 294,0 | 3,401 |
2,45 | 37,0 | 27,036 | 7,0 | 302,0 | 3,311 |
2,50 | 38,5 | 25,964 | 7,1 | 311,0 | 3,215 |
2,60 | 41,7 | 24,006 | 7,2 | 320,0 | 3,125 |
2,65 | 43,3 | 23,108 | 7,3 | 329,0 | 3,040 |
2,70 | 44,9 | 22,260 | 7,4 | 338,0 | 2,959 |
2,75 | 46,6 | 21,458 | 7,5 | 347,0 | 2,882 |
2,80 | 48,3 | 20,699 | 7,6 | 356,0 | 2,809 |
2,90 | 51,8 | 19,296 | 7,7 | 366,0 | 2,732 |
2,95 | 53,6 | 18,647 | 7,8 | 375,0 | 2,667 |
3,0 | 55,5 | 18,031 | 7,9 | 348,0 | 2,874 |
3,10 | 59,2 | 16,887 | 8,0 | 395,0 | 2,532 |
3,20 | 63,1 | 15,847 | 8,1 | 405,0 | 2,469 |
3,30 | 67,1 | 14,902 | 8,2 | 415,0 | 2,410 |
3,40 | 71,3 | 14,038 | 8,3 | 425,0 | 2,353 |
3,45 | 73,4 | 13,633 | 8,4 | 435,0 | 2,299 |
3,50 | 75,5 | 13,247 | 8,5 | 445,0 | 2,247 |
3,60 | 79,9 | 12,521 | 8,6 | 456,0 | 2,193 |
3,70 | 84,4 | 11,848 | 8,7 | 467,0 | 2,141 |
3,75 | 86,7 | 11,539 | 8,8 | 477,0 | 2,096 |
3,80 | 89,0 | 11,238 | 8,9 | 488,0 | 2,049 |
3,90 | 93,8 | 10,661 | 9,0 | 499,0 | 2,004 |
3,95 | 96,2 | 10,400 | 10,0 | 617,0 | 1,621 |
Nominal diameter, mm | Wire diameter tolerance, mm (normal precision) | Tensile strength, N/mm2 (kg/mm2) | Type of shipment – coils weight, kg |
0,25 – 0,55 | -0,02 | 690-1370 (70-140) | Plastic spools К-250А net weight up to 20 |
0,56 – 0,65 | -0,04 | 690-1270 (70-130) | small coils of free winding of 20-40; heavy coils 550±50; 950±50 of conic winding |
0,6 – 0,75 | -0,02 | 690-1270 (70-130) | |
0,8 – 1,0 | -0,05 | 690-1270 (70-130) | small coils of free winding of 25-80; heavy-weight coils of 550±50; 950±100; heavy-weight coils of 950±50 of conic winding; coils of «Rosette» type 150±10; up to 300 |
1,1 – 1,2 | -0,06 | 590-1270 (60-130) | |
1,3 – 1,5 | -0,10 | 590-1180 (60-120) | |
1,6 – 2,0 | -0,10 | 590-1180 (60-120) | small coils of free winding of 30-80; 100 ±10; heavy-weight coils of 950±50; coils of «Rosette» type up to 800 |
2,2 – 2,5 | -0,12 | 590-1180 (60-120) | |
2,8 – 3,2 | -0,12 | 540-1080 (55-110) | |
3,5 – 4,5 | -0,16 | 440-930 (45-95) | small coils of free winding of 50-80; 100 ±10; heavy-weight coils of 950±50; 1950±100 coils of «Rosette» type up to 800 |
5,0 – 6,0 | -0,16 | 390-830 (40-85) | |
5,5 – 10,0 | -0,16 | 390-600 (40-61) | heavy-weight coils of 300-500; 950±50; 1950±100, 2950±100 |
6,1 – 10,0 | -0,20 | 390-700 (40-71) | |
10,0 – 13,0 | -0,20 | 390-700 (40-71) | coils of free winding of 300-500 |
By the additional agreement with the Supplier the production of the wire with intermediate diameters is possible.
Admissible tolerances on diameter of wire, mm | The range of diameters precision class, mm | ||
Т1 | Т2 | Т3 | |
±0,012 | – | – | 0,25≤ d <0,33 |
±0,015 | – | 0,25≤ d <0,31 | 0,33≤ d <0,52 |
±0,020 | – | 0,31≤ d <0,55 | 0,52≤ d <0,91 |
±0,025 | 0,30≤ d <0,52 | 0,55≤ d <0,86 | 0,91≤ d <1,42 |
±0,030 | 0,52≤ d <0,74 | 0,86≤ d <1,24 | 1,42≤ d <2,05 |
±0,035 | 0,74≤ d <1,01 | 1,24≤ d <1,69 | 2,05≤ d <2,78 |
±0,040 | 1,01≤ d <1,31 | 1,69≤ d <2,20 | 2,78≤ d <3,63 |
±0,045 | 1,31≤ d <1,66 | 2,20≤ d <2,78 | 3,63≤ d <,4,60 |
±0,050 | 1,66≤ d <2,05 | 2,78≤ d <3,43 | 4,60≤ d <5,67 |
±0,060 | 2,05≤ d <2,94 | 3,43≤ d <4,94 | 5,67≤ d <8,17 |
±0,070 | 2,94≤ d <4,01 | 4,94≤ d <6,73 | 8,17≤ d ≤11,12 |
±0,080 | 4,01≤ d <5,23 | 6,73≤ d <8,78 | 11,12≤ d ≤13,00 |
±0,090 | 5,23≤ d <6,62 | 8,78≤ d ≤11,12 | – |
±0,100 | 6,62≤ d <8,17 | 11,12≤ d ≤13,00 | – |
±0,120 | 8,17≤ d ≤11,76 | – | – |
±0,140 | 11,76≤ d ≤13,00 | – | – |
The range of diameters precision class I, mm | Admissible tolerances on diameter of wire, mm |
0,25≤ d <0,28 | ±0,010 |
0,28≤ d <0,37 | ±0,015 |
0,37≤ d <0,63 | ±0,020 |
0,63≤ d <1,10 | ±0,025 |
1,10≤ d <1,30 | ±0,03 |
1,30≤ d <2,20 | ±0,05 |
2,20≤ d <3,50 | ±0,06 |
3,50≤ d <6,30 | ±0,08 |
6,30≤ d ≤10,00 | ±0,10 |
Wire diameter, mm | Coil weight, kg | Outer diameter of coil, mm | Inner diameter of coil, mm | Height, mm | Quantity of coils in package, pcs. | Outer diameter of package, mm | Inner diameter of package, mm | Height of package, mm |
0,5 – 1,5 | 25 | 440 ±10 | 250 ±10 | 100 ±10 | 8 | 460 ±10 | 220 ±10 | 520 ±20 |
440 ±10* | 240 ±10* | 700 ±30* | ||||||
50 | 450 ±10 | 230 ±10 | 140 ±10 | 6 | 470 ±20 | 200 ±20 | 430 ±30 | |
450 ±10* | 230 ±10* | 610 ±20* | ||||||
80 | 460 ±20 | 220 ±20 | 200 ±20 | 5 | 470 ±20 | 200 ±20 | 480 ±30 | |
450 ±10* | 230 ±10* | 780 ±40* | ||||||
1,0 – 1,5 | 550 ± 50 | 710 ±10 | 450 | 420 ±10 |
|
|
| |
0,6 – 1,5 | 950±50 are of conic winding | top 700 ±10 | 355 | 580 |
|
|
| |
base 745 ±10 | ||||||||
1,6 – 2,8 | 50 | 620 ±20 | 470 ±20 | 80 ±20 | 8 | 640 ±20 | 440 ±20 | 480 ±60 |
630 ±20* | 410 ±20* | 850 ±30* | ||||||
80 | 650 ±20 | 460 ±20 | 130±20 | 5 | 700 ±20 | 410 ±20 | 460 ±60 | |
660 ±20* | 420 ±20* | 700 ±60* | ||||||
100 ± 10 | 660 ± 20 | 460 ±20 | 150 ±20 | 5 | 700 ±20 | 410 ±20 | 460 ±60 | |
660 ±20* | 420 ±20* | 700 ±60* | ||||||
3,0 – 6,0 | 50 | 620 ±20 | 470 ±20 | 90 ±20 | 8 | 640 ±20 | 440 ±20 | 510 ±60 |
630 ±20* | 410 ±20* | 870 ±30* | ||||||
80 | 650 ±20 | 460 ±20 | 140 ±20 | 5 | 700 ±20 | 410 ±20 | 510 ±60 | |
660 ±20* | 420 ±20* | 720 ±60* | ||||||
100 ± 10 | 660 ±20 | 460 ±20 | 160 ±20 | 5 | 700 ±20 | 410 ±20 | 510 ±60 | |
660 ±20* | 420 ±20* | 720 ±60* | ||||||
1,6 – 6,0 | 950 ± 100 | 830 ± 20 | 450 ± 10 | 440 ± 20 | ||||
2,4 – 10,0 | 1950±100 | 960±20 | 500±10 | 650±20 | ||||
2950±100 | 1050±20 | 620±10 | 840±20 | |||||
5,5 – 8,0 | 80-300 | 750 | 500 | 80-300 | ||||
5,5 – 10,0 | 80-300 | 850 | 600 | 80-300 | ||||
6,0 – 13,0 | 500 | 1100±100 | 520 ±20 | 400 |
Parameter | Rosette Size | ||
Wire diameter, mm | 0,8 – 1,5 | 1,6 – 4,0 | |
Weight, kg | 150±10 | 500±10 | 1000±10 |
Outer Diameter, mm | 450 ±10 | 810 ±10 | 810 ±20 |
Inner diameter, mm | 225 ±20 | 370 ±10 | 370 ±10 |
Height, mm | 480 ±20 | 430 ±20 | 900 ±20 |
Wire diameter, mm | Coil weight, kg | Outer diameter of coil, mm | Inner diameter of coil, mm | Height, mm | Inner diameter of spool, mm |
0,25-0,55 | до 20 | 250 | 160 | 200 | 36 |
Production of heat-treated wire is possible in coils of rectangular section – “Brehmen rings”
with the following technical requirements:
— diameters from 2,00 up to 5,00 mm; wire oiled/not oiled;
— tensile strength 300-400 N/mm2;
— The production of oiled wire is possible.
Overall dimensions of coils “Brehmen rings”:
Coil weight, kg | Inner diameter, mm | Outer diameter, mm | Height, mm |
20 | 100 | 250 | 100 |
30 | 210 | 310 | 150+2 |
40 | 210 | 330+5 | 150+2 |
Delivery: coils weight – “Brehmen rings” — on pallet 960 kg, 1080 kg.
Production of heat-treated wire is possible in coils with a special form winding of weight 200 grams
with the following technical requirements:
— diameters from 1,2 mm; 1,4 mm; 1,6 mm; wire not oiled;
— tensile strength 300-490 N/mm2;
Sizes acc. to drawing in mm:
a | b | c | d | e |
44-52 | 17-20 | 39-43 | 23-26 | 65-70 |
Type of packaging: plastic buckets of 20 kg (100 coils)
Type of shipment: on pallet, net weight 720 kg (36 buckets)
Type of shipment | Weight, kg | Material or combination of materials for packing |
Plastic spools К-250А | up to 20 | Without additional packing |
Stretch | ||
Coil | 20-100 | Without additional packing |
Stretch (for wire diam (0,5-0,8) mm | ||
polyethylene film | ||
inhibited film | ||
Package coils
(conical winding)
“Rosette” | 180-500
1950±100
| Without additional packing |
Stretch (for heavy-weight coils of conical winding | ||
polyethylene film | ||
inhibited film | ||
polypropylene sleeve | ||
inhibited film + polypropylene sleeve | ||
polyethylene film + polypropylene sleeve | ||
two-layer sleeve (polypropylene with inhibited paper) |
Nominal diameter, mm | Theoretical weight of 1 meter of steel wire, g/m | Theoretical length of 1 MT of steel wire (km/MT) | Nominal diameter, mm | Theoretical weight of 1 meter of steel wire, g/m | Theoretical length of 1 MT of steel wire (km/MT) |
0,50 | 1,5 | 666,66 | 4,0 | 98,6 | 10,142 |
0,60 | 2,2 | 450,772 | 4,1 | 103,6 | 9,654 |
0,70 | 3,0 | 331,180 | 4,2 | 108,8 | 9,199 |
0,80 | 3,9 | 253,559 | 4,3 | 113,99 | 8,777 |
0,90 | 4,99 | 200,343 | 4,4 | 119,4 | 8,382 |
1,0 | 6,2 | 162,278 | 4,5 | 124,8 | 8,014 |
1,05 | 6,8 | 147,191 | 4,6 | 130,0 | 7,692 |
1,10 | 7,5 | 134,114 | 4,7 | 136,0 | 7,353 |
1,15 | 8,2 | 122,706 | 4,8 | 142,0 | 7,043 |
1,20 | 8,9 | 112,693 | 4,9 | 148,0 | 6,756 |
1,25 | 9,6 | 103,858 | 5,0 | 154,1 | 6,491 |
1,30 | 10,4 | 96,022 | 5,1 | 160,0 | 6,250 |
1,35 | 11,2 | 89,041 | 5,2 | 167,0 | 5,988 |
1,40 | 12,1 | 82,795 | 5,3 | 173,0 | 5.780 |
1,45 | 12,9 | 77,183 | 5,4 | 180,0 | 5.555 |
1,50 | 13,9 | 72,123 | 5,5 | 185,5 | 5,365 |
1,55 | 14,8 | 67,545 | 5,6 | 193,3 | 5,175 |
1,60 | 15,8 | 63,391 | 5,7 | 200,0 | 5.000 |
1,65 | 16,8 | 59,605 | 5,8 | 207,0 | 4.831 |
1,70 | 17,8 | 56,151 | 5,9 | 215,0 | 4.651 |
1,75 | 18,9 | 52,989 | 6,0 | 221,9 | 4,508 |
1,80 | 19,9 | 50,085 | 6,1 | 299,0 | 3.344 |
1,85 | 21,1 | 47,414 | 6,2 | 237,0 | 4.219 |
1,90 | 22,3 | 44,953 | 6,3 | 245,0 | 4.081 |
1,95 | 23,4 | 42,676 | 6,4 | 253,0 | 3.953 |
2,0 | 24,7 | 40,570 | 6,5 | 260,5 | 3,841 |
2,10 | 27,2 | 36,798 | 6,6 | 269,0 | 3,717 |
2,20 | 29,8 | 33,528 | 6,7 | 277,0 | 3,610 |
2,30 | 32,6 | 30,677 | 6,8 | 285,0 | 3,509 |
2,40 | 35,5 | 28,173 | 6,9 | 294,0 | 3,401 |
2,45 | 37,0 | 27,036 | 7,0 | 302,0 | 3,311 |
2,50 | 38,5 | 25,964 | 7,1 | 311,0 | 3,215 |
2,60 | 41,7 | 24,006 | 7,2 | 320,0 | 3,125 |
2,65 | 43,3 | 23,108 | 7,3 | 329,0 | 3,040 |
2,70 | 44,9 | 22,260 | 7,4 | 338,0 | 2,959 |
2,75 | 46,6 | 21,458 | 7,5 | 347,0 | 2,882 |
2,80 | 48,3 | 20,699 | 7,6 | 356,0 | 2,809 |
2,90 | 51,8 | 19,296 | 7,7 | 366,0 | 2,732 |
2,95 | 53,6 | 18,647 | 7,8 | 375,0 | 2,667 |
3,0 | 55,5 | 18,031 | 7,9 | 348,0 | 2,874 |
3,10 | 59,2 | 16,887 | 8,0 | 395,0 | 2,532 |
3,20 | 63,1 | 15,847 | 8,1 | 405,0 | 2,469 |
3,30 | 67,1 | 14,902 | 8,2 | 415,0 | 2,410 |
3,40 | 71,3 | 14,038 | 8,3 | 425,0 | 2,353 |
3,45 | 73,4 | 13,633 | 8,4 | 435,0 | 2,299 |
3,50 | 75,5 | 13,247 | 8,5 | 445,0 | 2,247 |
3,60 | 79,9 | 12,521 | 8,6 | 456,0 | 2,193 |
3,70 | 84,4 | 11,848 | 8,7 | 467,0 | 2,141 |
3,75 | 86,7 | 11,539 | 8,8 | 477,0 | 2,096 |
3,80 | 89,0 | 11,238 | 8,9 | 488,0 | 2,049 |
3,90 | 93,8 | 10,661 | 9,0 | 499,0 | 2,004 |
3,95 | 96,2 | 10,400 | 10,0 | 617,0 | 1,621 |