Movable fence "MOBILE"
Movable fence "MOBILE"
Temporary storage areas
Construction sites
Emergency recovery zones
Rescue zones
Temporary access restriction
Separation of human streams at mass events
Rods diameter, Н (3,5 mm; 3 mm)
Rods diameter, V (3,5 mm; 3 mm)
Hot-dip galvanized and polymer paint (Zn / ZnAL + Pes (polyester))
Differences from competitors’ offers:
galvanized steel bar according to EN 10244-2 is used for the production of «D-Fence MOBILE» fencing sections;
corrosion resistance of welded sections is increased 5 times due to special treatment of galvanized wire using OXSILAN technology;
welded joints are made according to a technology that allows you to maximize the preservation of the zinc layer at the welding points;
compliance of the wire thicknesses with the declared ones, high impact strength of the panels;
written proprietary manufacturer’s warranty from 7 to 15 years.
You are getting:
· The minimum time for the construction of the fence without the use of special equipment and skills;
· Optimization of transportation and storage processes, saving human, time and financial resources;
· Certificates;
· Timely delivery;
· Consultation of a specialist;
· Miscalculation of the order;
· The ability to manufacture welded sections according to individual dimensions;
· Environmentally friendly products;
· Wide range of colors.
Guaranteed preservation of appearance
the following defects will not appear on the product:
• peeling and cracking of the coating;
• uneven strong discoloration;
• rust stains.
Specifications Warranty
During the warranty period, there will be no perforating corrosion on the elements of panel fences.
| Marking | Rods diameter, mm | Fence width, mm | Fence height, mm | Mesh size, mm | ||
| H (horizontally) | V (vertically) | vertically | horizontally | |||
| H3,5 V3,5 | 3,5 | 3,5 | 3454 | 1200 | 300 | 100 |
| 2000 | 300 | 100 | ||||
| H3 V3 | 3 | 3 | 2200 | 1200 | 300 | 100 |
| 1200 | 1200 | 300 | 100 | |||
All products are galvanized.
5 stages of preparation of all fencing elements in an automatic tunnel with the application of OXSILAN nano conversion coating.
OXSILAN is a nano-layer of organosilicon polymers, which forms a non-porous coating that is firmly attached to the metal surface and provides high adhesion of the paintwork and resistance to corrosion.
Tests carried out in the laboratory confirm the compliance of the level of sectional fences with European standards:
guaranteed thickness of the polymer coating not less than 60 microns; adhesion test result (cross-cut method according to ISO 2409) — 0 points;
salt spray resistance (notch corrosion according to ISO 9227) no more than 2 mm after 1500 hours in a salt spray chamber.
You are getting:
· The minimum time for the construction of the fence without the use of special equipment and skills;
· Optimization of transportation and storage processes, saving human, time and financial resources;
· Certificates;
· Timely delivery;
· Consultation of a specialist;
· Miscalculation of the order;
· The ability to manufacture welded sections according to individual dimensions;
· Environmentally friendly products;
· Wide range of colors.
Guaranteed preservation of appearance
the following defects will not appear on the product:
• peeling and cracking of the coating;
• uneven strong discoloration;
• rust stains.
Specifications Warranty
During the warranty period, there will be no perforating corrosion on the elements of panel fences.
| Marking | Rods diameter, mm | Fence width, mm | Fence height, mm | Mesh size, mm | ||
| H (horizontally) | V (vertically) | vertically | horizontally | |||
| H3,5 V3,5 | 3,5 | 3,5 | 3454 | 1200 | 300 | 100 |
| 2000 | 300 | 100 | ||||
| H3 V3 | 3 | 3 | 2200 | 1200 | 300 | 100 |
| 1200 | 1200 | 300 | 100 | |||
All products are galvanized.
5 stages of preparation of all fencing elements in an automatic tunnel with the application of OXSILAN nano conversion coating.
OXSILAN is a nano-layer of organosilicon polymers, which forms a non-porous coating that is firmly attached to the metal surface and provides high adhesion of the paintwork and resistance to corrosion.
Tests carried out in the laboratory confirm the compliance of the level of sectional fences with European standards:
guaranteed thickness of the polymer coating not less than 60 microns; adhesion test result (cross-cut method according to ISO 2409) — 0 points;
salt spray resistance (notch corrosion according to ISO 9227) no more than 2 mm after 1500 hours in a salt spray chamber.